Clipex Installation Guide
Intsalling Clipex really is as easy as it seems. See for yourself in our step by step guide and video guides below.
Step 1. | Step 2. | Step 3. |
![]() |
![]() |
![]() |
Secure the end strainer post kit. | Tie off wire netting both ends and tension to middle until upright and taut. |
Place Clipex posts between vertical wires at even spacings then drive in.
|
Step 4. | Step 5. | Step 6. |
![]() |
![]() |
![]() |
Push the wire into the slot. |
Push the wire down. |
Finally tension fence to allow tension curves to
|