Highland Cattle Crush - Galvanised

Product Code
  • Designed specifically for highland cattle the sides of this crush are only 1100mm high to allow animals to enter with horns safely over the top
  • Hinged side doors allowing full access to animal's flanks
  • Rear gate

See full description

Delivery is free on orders over £250 within a 70 mile radius of our depots. For orders outside a 70 mile radius of our depots, delivery costs will apply. For orders under £250, delivery costs will apply.

Delivery costs start from as little as £5.99 but is dependent on the size and weight of your order. All delivery costs are clearly stated in stage 2 of the checkout, once you have entered your delivery postcode.

About product

Designed specifically for highland cattle, the sides of this crush are only 1100mm high to allow animals with horns to enter safely.

When operated, the yoke lever moves the yoke both upwards and inwards behind the animal's field of view, whilst the yoke adjusting handle allows for infinite adjustment of the neck aperture between 100 and 290mm.  Ahead of the yoke, the two-piece wrap around front gates open out in a single operation allowing unobstructed access to the animal's head.  Hinged side doors allow full access to the animals flanks whilst an angled tread plate floor ensures that feet stay inside the crush.


  • Use of yoke adjusting handle allows infinite adjustment of neck apertures from 100 to 290mm
  • Easy entry as yoke bars retract out of animal's field of view
  • Yoke bars drop below animals horns for safe entry
  • Operation of yoke lever moves the yoke upwards and inwards behind animals field of view
  • Right hand yoke operation. Left hand yoke operation special build.


  • Heavy duty box section frame, tube infill construction
  • Tread plate floor angled both sides keeps animals feet inside crush
  • Two piece wrap around front gates that open in a single operation, allows obstruction free access to animal's head
  • Sides are 1100mm high to allow animal to pass into crush with horns safely over the top
  • Hinged side doors allowing full access to animal's flanks. Rear gate
  • Two removable side extension bars. Captive rump bar facility
  • Special lifting frame available
  • Fully galvanised to BSEN ISO 1461


  • 2775mm long x 1300mm wide x 738mm internal width x 1900mm high

Did you know that you could be entitled to claim a grant up to the value of £4050 for a cattle crush through the Rural Development Programme? Click on the blue media tab above to view the Small Grant Handbook.

Please note - due to the nature of this product longer lead times may apply. If your order will be affected, your local depot will get in touch and keep you updated every step of the way.

Still not sure?

If you have any question about this product or its suitability, get in touch with our expert team if you need any help. We would love to hear from you.