Triple X Stock Fence End Strainer

Product Code
KCPX10
  • For use with Clipex fence up to 1.4m height as an end strainer
  • Guaranteed for 30 years (should exceed this subject to location)
  • StaYfast for the test of time

See full description

Delivery is free on orders over £250 within a 70 mile radius of our depots. For orders outside a 70 mile radius of our depots, delivery costs will apply. For orders under £250, delivery costs will apply.

Delivery costs start from as little as £5.99 but is dependent on the size and weight of your order. All delivery costs are clearly stated in stage 2 of the checkout, once you have entered your delivery postcode.

About product

Designed to StaYfast for the test of time, StaYfast Strainer assembly and instillation is extremely fast and efficient. When combined with Xfence wire netting and Clipex all steel posts, it will provide you with possibly the best longitudinal integrated long life fencing system money can buy.


Suitable for use with Clipex fences up to 1.4m in height as an end strainer.


NEW DESIGN : Angled anti lift, base and thrust plates, reduces lift in softer ground.


StaYfast Features

  • Guaranteed for 30 years (should exceed this subject to location)
  • Minimal components, only 5, easy to assemble (unlike other similar systems)
  • Exceptionally strong, thick walled tubular strainer can be mechanically or hydraulically driven in
  • Fully welded 4mm thick base and thrust/directional plates
  • Hot dip galvanised after manufacture in the UK to BS EN ISO 1461
  • Easy to transport to site (reduces carbon footprint of some projects)
  • Pre-drilled holes to take multiple struts for two way and corner strainers

Specifications

Strainer


  • Height – 2.4m
  • Weight – 18.5kg
  • Profile - 75mm dia x 3.00mm
  • Pre-drilled and fully welded
  • 4mm thick x 250mm thrust/base plates to reduce any movement
  • Cylindrical hollow section aids easier driving in
  • Pre drilled four times to allow for easy strut attachment at 90, 180 and 270 degrees

Strut complete with hook


  • Height – 2.4m
  • Weight - 12kg
  • Profile – 50mm dia x 3.0mm
  • Drilled/welded or mitre cut ready for instant use

Plate and pin


  • 4mm x 250mm triangular base plate, drilled 20mm hole to take pin.
  • 20mm x 750mm solid pin.

Tension wire and Gripple


  • 4.5m x 3mm alu/zinc wire (for larger projects the above can be swapped for 3.15mm HT alu/zinc wire)
  • Gripple wire joiner

Still not sure?

If you have any question about this product or its suitability, get in touch with our expert team if you need any help. We would love to hear from you.