6 metre chain fence strainer with clevis hooks have been designed for use with McVeigh Parker clamp bars (A220, A2225, A2230). By combining these two products you can effectively and easily tension prefabricated wire netting.
The traditional method is to have two chain strainers at the top and bottom of the clamps and pull to the middle of your fence run, this will give even tension to the fence.
Simple snap clevis hook enables easy fixing and dismantling. The tested chain and claw hook crawl up the chain as the handle is pushed from to and fro, giving controlled even tension without the fear of slipping.
- Chain Length : 6 Metre (19'7") tested chain
- Body : Gold plated for corrosion protection
- Clevis hook on the Chain and strainer body
- Loading : 600kg load max
- Handle length: 45cm (18")
- Simple to use
Fine tuning wire tension
Where half link adjustments are called for, let off the tension, open the grab, rotate the link 90°and allow the claw to grab the next link
Removing the strainer
Release the strainer by initially tightening the wire and removing the claw that is further up the chain.
Use the fingers and thumb guide to the claw. Support the chain with the palm of one hand placed behind the claw to ensure the chain does not twist. Hold the handle firmly through¬ out the action.