×

MDPE Pipe

Product Code
MDPE Pipe
  • Widely used plastic drainage pipe
  • Available in a selection of pipe diameters and roll lengths
  • Huge range of Philmac fittings available to suit

See full description

Delivery is free on orders over £360 within a 70 mile radius of our depots. For orders outside a 70 mile radius of our depots, delivery costs will apply. For orders under £360, delivery costs will apply.

Delivery costs start from as little as £5.99 but is dependent on the size and weight of your order. All delivery costs are clearly stated in stage 2 of the checkout, once you have entered your delivery postcode.

About product

Commonly known as alkathene pipe, 20mm has replaced the old black 1/2" class C & D pipe, 25mm has replaced the old black 3/4" class C & D pipe and 32mm has replaced the old black 1" class C & D pipe. All sizes are available in 25m, 50m, 100m, and 150m coils. Universally accepted as an established alternative to ductile iron and UPVC pipes.


Features

  • Light and durable
  • Flexible
  • Immune to corrosion
  • Internal abrasion resistant, stress cracking resistant and resistant to a variety of chemicals
  • For below ground use. (For long over ground runs, black MDPE pipe is recommended to prevent light ingress and deterioration)
  • WRC tested
  • WRAS approved
  • Complies with BSEN 12201 Potable Water
  • All pipe coils pressure rated to 12 bar

20mm

  • Pipe Size - 20mm
  • Average bore I.D. dia - 15.2mm
  • Average wall thickness - 2.4mm
  • Average weight per Mtr - 0.13kg
25mm
  • Pipe Size - 25mm
  • Average bore I.D. dia - 20.1mm
  • Average wall thickness - 2.5mm
  • Average weight per Mtr - 0.16kg
32mm
  • Pipe Size - 32mm
  • Average bore I.D. dia - 25.8mm
  • Average wall thickness - 3.1mm
  • Average weight per Mtr - 0.27kg

Related Products