Clipex Eco/Standard post driver sleeve

Product Code
CL2790

If you have any job specific question relating to this product, or would like a no obligation quotation prepared, please get in contact using this form. For quotation purposes, please be as specific regarding your requirements as possible

  • Protects the top of the posts whilst driving in manually or mechanically
  • Designed for a standard stock fence height
  • Please note this tube fits the Eco/Standard Clipex posts, please use CL2793 for Beefy Clipex posts

See full description

Delivery is free on orders over £250 within a 70 mile radius of our depots. For orders outside a 70 mile radius of our depots, delivery costs will apply. For orders under £250, delivery costs will apply.

Delivery costs start from as little as £5.99 but is dependent on the size and weight of your order. All delivery costs are clearly stated in stage 2 of the checkout, once you have entered your delivery postcode.

About product

This Eco/Standard driver sleeve protects the top of the Clipex Eco and standard posts whilst driving in manually or mechanically.


The depth of the sleeve is designed for a standard stock fence height, when the sleeve touches the ground this is your pre-determined fence height, it's simply a matter driving your post in then lifting the sleeve off and then pushing your already tensioned netting into the clips.


This tube fits the Eco/Standard Clipex posts, please use CL2793 for Beefy Clipex posts.


Please note - when using Clipex sleeves PPE MUST be worn. Special care should be taken if using to drive in posts above head height. Do NOT hand hold posts beneath sleeve base.


Still not sure?

If you have any question about this product or its suitability, get in touch with our expert team if you need any help. We would love to hear from you.

Related Products