Knipex High Leverage Cutters
- Chrome vanadium heavy-duty steel
- Cuts bolts, nails, rivets, etc. up to 5.2 mm dia
- Small compact powerful cutter for professionals or own use
See full description
Delivery is free on orders over £420 within a 70 mile radius of our depots. For orders outside a 70 mile radius of our depots, delivery costs will apply. For orders under £420, delivery costs will apply.
Delivery costs start from as little as £5.99 but is dependent on the size and weight of your order. All delivery costs are clearly stated in stage 2 of the checkout, once you have entered your delivery postcode.
About product
These high leverage cutters from Knipex offer precision cutting, are suitable for soft and hard wire and are commonly used by fencing contractors and farmers for cutting line-wire up to 4mm high tensile wire. They feature a small recess at the base of the cutting jaw to help keep material as close to the pivot point as possible, resulting in an easier cut. They are also capable of cutting piano wire, bolts, nails and rivets up to a diameter of 5.2mm. It is thanks to the efficient joint design that they deliver an exceptional cutting experience. The cutting edges are approximately ranked 64 HRC on the Rockwell Rating.
These cutters feature an opening spring and locking device which is integrated in the handles which allows for comfortable handling and protection when being transported, and a gripping surface below the joint for gripping and pulling wires with a diameter from 1mm.
Knipex model number 71 32 200.
Features
- 60% less effort required compared to conventional high-leverage diagonal cutters
- The small recess at the base of the cutting jaw helps keep material as close to the pivot point as possible, resulting in an easier cut. (Please note that similar models available in the Knipex range do not feature this recess)
- Lever-action mechanism ensures a favourable ratio with very little friction. A cutting force over 30 x higher than the hand force applied
- Precision cutting edges for soft and hard wire as well as piano wire
- Cuts bolts, nails, rivets, etc. up to 5.2 mm dia
- Efficient joint design ensures exceptional cutting performance
- Cutting edges additionally induction hardened, hardness approx. 64 HRC
- Opening spring and locking device are integrated in the handles comfort and protected transport
- Gripping surface below the joint for gripping and pulling wires with a diameter from 1.0 mm
- Chrome vanadium heavy-duty steel, forged, oil-hardened
