Delivery
FREE delivery over £420 inc VAT
High Tensile Line Wire
In stock
Only %1 left
Product Code
High Tensile Line Wire
From:
£51.00
plus VAT
£61.20
- High tensile line wire for a wide range of fencing uses
- Available in 2.00mm, 2.50mm, 3.15mm, or 4.00mm
- Heavily galvanised for a long life
Browse our selection of specifications sheets for more details on selected products. Find out more.
We found other products you might like!
-
StaplesFrom: £5.67 plus VAT £6.80 -
Gripple Plus Wire JoinerFrom: £0.72 plus VAT £0.86 -
Gripple T-ClipFrom: £0.76 plus VAT £0.91 -
Knipex High Leverage Cutters£42.91 plus VAT £51.49 -
Collapsible Spinning Jenny Wire Dispenser£84.05 plus VAT £100.86 -
Wire Grab Chain Strainer£79.10 plus VAT £94.92 -
Strainrite XT1 Permanent Wire Strainer£2.45 plus VAT £2.94
Unlike mild line wire which is malleable and will keep stretching, the elasticity of high tensile line wire means that any pressure applied to the wire will spring back once the pressure is released. Using high tensile line wire will give you a high strength fence/support wire with minimal maintenance. Another advantage is that a greater distance between intermediate posts can be achieved.
Options available
- Standard high tensile line wire (galvanised) is available in 2.00mm, 2.50mm, 3.15mm and 4.00mm gauges
- Standard high tensile wire on Bobbin handy reels (galvanised) is available in 2.50mm and 3.00mm gauges
- XTRALIFE alu/zinc coated high tensile line wire (lasting up to three to four times longer than normal heavily galvanised wire) is available in 2.50mm and 3.15mm gauges
Specifications
Standard high tensile galvanised line wire
- Tensile strength: 1250 -1350 (N/mm2)
- Coating weight: min 240g/m2
- Wire diameter tolerance: +/-0.04(mm)
- Coil ID / Coil OD : 570 mm / 730 mm Approx
- Heavily galvanised to BSEN 10244-2 Class A
XTRALIFE alu/zinc coated high tensile line wire
- Tensile strength: 1250 -1350 (N/mm2)
- Coating weight: min 240g/m2
- Wire diameter tolerance: +/-0.04(mm)
- Coil ID / Coil OD: 570 mm / 730 mm approx.
- Alu/zinc coating which exceeds BSEN 10244-2 Class A
Write Your Own Review
