Deer Fencing

Clipex all steel fencing solution will save you time and money and deliver a fence with a service life in excess of 30 years. Guaranteed. 

• 50% quicker - than traditional fencing methods
• Stronger - made of 450 grade high tensile steel with an added backing plate at ground level
• Easier - simply push the wire in to the clip and it is attached
• Cheaper - than timber methods over the lifetime of the fence
  Longer - guaranteed service life of 30 years.

• Clipex Deer Standard Post

  The Clipex® Deer Standard post is a 3.0m long 14 clip post, designed specifically for all X fence 13/190 deer or boar fence patterns with one line of barbed, plain or electric above. All 13 line wires are clipped to the post to provide real strength and defend against any attention deer or boar may give the fenceline. 

  This deer standard post is suitable for long runs that may get occasional attention, however if real strength or highly populated areas or enclosures are required, then we would recommend using the stronger Deer Beefy posts. Beefy posts have a larger profile with 60% increased surface area and up to 230% more lateral strength due to the unique flange profile.
  
  Post specification
  - Length: 3.0m
  - Weight: 5.4kg
  - In ground depth: 900mm (giving desired fence height of 2.1m)
  - Profile: 44mm x 35mm
  - Thickness: 3.0mm
  - Coating: 600grm galvanised zinc coating
  - Tensile strength: 520-620 N/mm2
  
  What wire is compatible?
  We suggest using the following wire netting with this post:
  - X Fence Deer Fence XHT-13-190-15
  - X Fence Deer Fence XLHT13-190-15
  - X Fence Boar Fence XHT13-190-7.5
  
  

• Clipex Deer Beefy Posts

  The Clipex® Deer Beefy is a 3.0m long 14 clip post, designed specifically for all X Fence 13/190 deer or boar fence mesh patterns allowing for one line of barbed, plain or electric above. All 13 lines are clipped to provide real strength and defend against any attention deer or boar may give the fence line. 

  The Beefy has 230% more strength than a standard post and with 60% more surface area which give it better adhesion in the ground. The Beefy can also be used on slight angles of 15 degrees or less or coupled with a deer Triple X strut (CL2750) and a beefy bracket (CL2765) they make an economical end strainer, ideal for areas of low livestock or predator pressure, such as new plantations, woodland boundaries or gardens.
  
  Post specification
  - Length: 3.0m
  - Weight: 10.5kg
  - In ground depth: 900mm (giving desired fence height of 2.1m)
  - Profile: 66mm x 59mm
  - Thickness: 3.5mm
  - Coating: 600grm galvanised zinc coating
  - Tensile strength: 520-620 N/mm2
  
  What wire is compatible?
  We suggest using the following wire netting with this post –
  - X Fence Deer Fence XHT-13-190-15
  - X Fence Deer Fence XLHT13-190-15
  - X Fence Boar Fence XHT13-190-7.5

   

X fence stock fence is a premium wire netting that will give a very good return on investment. The one piece vertical wire allows you to space intermediate stakes up to 5m apart. Fewer stakes mean less labour which leads to overall savings. The tension curves and the spring like properties of high tensile wire remain taut throughout its life providing an effective, long lasting fence.

• X fence

  X fence fabricated fencing systems are world renowned for their durability and market leading quality. Using only the highest quality raw materials in their state-of-the-art production facility, X fence has been tried and proven in the harshest conditions and most testing applications worldwide.
  • Stronger wire 
  • Premium coating
  • Easier installation
  • Longer maintenance free life

  
  What separates X™ fence from the rest? 
  • X fence is the original X knot stiffstay product 
  • Only primary metal used, which means you get consistent tensile strength every time
  • Every roll comes with 450mm pre-stripped ends, which make tying off easier and quicker
  • Alu/zinc coated which gives 3-4 times longer life than standard galvanised products
  • The alu/zinc coating also makes the wire more ductile, easier to work with and won’t crack when tying off, which can happen with some heavy galvanised products 
  • X fence have years of experience in producing a premium product, having this knowledge has enabled them to apply the correct pressure on the knots which reduces the wire snapping at the knots when tying off which can happen with similar products
  • Guaranteed meterage 
  • Higher tensile strength than some cheaper heavy galvanised products helps retain tension over the life of the fence
   • Non abrasive knot, prevents hide damage
   • The British Standard BSEN 10244-2 coating lists a sacrificial zinc coat of 230 grm‐2, X fence exceeds these standards with a Alu/Zinc alloy coating which offers an extended life protection
   • X fence exceeds European Standards for strength and galvanisation and is manufactured to BSEN 10223-5

  X™ fence® Deer Fence XHT13-190-22 200m
  XHT13–190–22 Is a full height one piece exclusion deer net. The increased vertical wire spacing make this a more economical alternative to XHT13–190–15 and XHT-17-190-15. Ideal for plantation protection, the 22cm vertical wire is a cost-effective barrier to most larger breeds of deer. If Muntjacs are present, a smaller mesh pattern such as XHT13–190–7.5 would be recommended. The 200m rolls speed up erection and reduce joins.

   

  X™ fence® Deer Fence XHT17-190-15 100m
  This netting features extra line wires for added security and protection. The finer mesh excludes the smaller species, when properly constructed and maintained, Deer fencing is an effective way of controlling deer and allowing different land use in close proximity.

   

• Hinge Joint

  Hinge joint Deer fencing is available in both high and light tensile options.  If you need to contain use heavy gauge. If you wish to exclude you can use heavy or light gauge.
  
  

  HT Hinge Joint Deer Fence HT13-190-15 100m
  A popular used deer netting, ideal for enclosures, close containment and forest protection.
  
  We would recommend using this as an external fence or boundary fence. This is a good value high tensile wire.
  
  Exceeding British Standards BSEN10244, the XTREME reinforced coating provides a protection that lasts 3-4 times longer than commercially galvanised stock fence. Steel starts to rust when in contact with oxygen and air humidity but the XTREME reinforced coating protects it against corrosion due to oxidation, which is superior to traditional galvanisation.
  
  • Manufactured to BS EN 10223
  • Wire produced to BS 4102
  • XTREME reinforced coating, exceeds BSEN 10244-2 Class A lasts 3-4 times longer than commercially galvanised stock fence

  • Wire Gauge: 2.5mm throughout
  • Horizontal wires tensile strength: 1050/1250 N/mm²
  • Vertical wires tensile strength: 600/800 N/mm²
  
  A popular used deer netting, ideal for enclosures, close containment and forest protection. We would recommend using this as an external fence or boundary fence.
   
  LHT Hinge Joint Deer Fence LHT13-190-15

  Exceeding British Standards BSEN10244, the XTREME reinforced coating provides a protection that lasts 3-4 times longer than commercially galvanised stock fence.  Steel starts to rust when in contact with oxygen and air humidity but the XTREME reinforced coating protects it against corrosion due to oxidation, which is superior to traditional galvanisation.
  
   Wire Gauge: 2.5mm top/bottom wire, 2.0mm infills 
  • Horizontal wires tensile strength: 1050/1250 N/mm²
  • Vertical wires tensile strength: 600/800 N/mm²

• Plastic Netting

  High tensile strength tough yet lightweight unobtrusive extruded plastic netting. An effective yet economical exclusion barrier, the perfect solution for an immediate and quick deer protection.

  This black netting creates an unobtrusive barrier, blending into the background, making it ideal for gardens. Lightweight, UV stabilised, rot proof and easy to install. This particular mesh and 1.8m fence height are designed to exclude Muntjac, Sika and Roe deer, although Fallow deer will be deterred we recommend a higher plastic or ideally a permanent galvanised wire netting fence for total exclusion.

   

  Netting type	Dimensions	Code
  Deer & Pheasant Net	1.8 x 100m - 50mm x 50mm	NET250
  Deer & Pheasant Net	1.2 x 100m - 50mm x 50mm	NET251

Triple X Fencing is McVeigh Parker’s bespoke, long-lasting high-performance fencing solution. This innovative product consists of the Clipex® quick clip steel post coupled with X Fence premium stiffstay wire netting, steel strainers and a choice of either barbed, line or electric wire. Triple X is an agricultural and commercial fencing system like no other, stronger wire, premium coating, easier installation and can offer up to 50% cost savings over its guaranteed 30 year life.

• Clipex Steel Post

  
  Clipex® the multi-award winning innovative galvanised steel post.
  • Each post has pre-fixed clips designed to take all the horizontal wires of your chosen X Fence wire netting.
  • Each wire is held firmly in place with a spring-loaded clip, no fiddly parts to lose or fit after erection.
  • These clips allow lateral flex, but very little vertical wire movement can happen, which is important when livestock start putting pressure on the fence.
  • Each post has a pre-fixed anti-lift plate below ground level to prevent lifting in soft or undulating ground.
  • Hot dip galvanised and independently tested in the UK, exceeding British Standard coating recommendations.

   

• X fence Premium Wire

  
  X Fence premium X knot fabricated wire netting – buying quality wire is key to any good fence.
  
  • The unique properties of X Fence make it stronger and last longer.
  • The high tensile wire properties and one-piece vertical wire reduce the amount of support posts needed, leading to a saving in labour and materials.
  • Only primary metals used in fabrication.
  • 24% stronger knot.
  • Alu/zinc coating lasts 3-4 times longer than heavy galvanised wire.
  • Full traceability from source to field.
  • Many Clipex® compatible mesh patterns are stocked (more patterns available for other uses).
  • X Fence is manufactured to BS EN 10223-5
  • Alu/zinc coating exceeds BS EN 10244-2
  • Dimensions & tolerances conform to BS EN 10218-2

• Triple X Steel Strainer

  
  Triple X Strainers are British made all steel hot dip galvanised, with fully-welded base and thrust plates, fully-welded top cap and pre-drilled holes for ease of strut installation.
  
  • The 3.2mm thick strainer allows them to be driven in hydraulically or mechanically.
  • Diagonal or box strainer versions available, whichever best suits your requirements and budget.
  • Installing a Triple X strainer could not be simpler. Minimal components mean full installation in less than 5 minutes is possible.
  • Galvanised coating to British Standard BS EN ISO 1461

Ideal for deer fencing and deer enclosures, the deer gates we have to offer are the very best choice for reliability and strength. Our deer gates provide you with a secure entry and exit point to your deer fencing without weakening the enclosure. All of our metal deer gates are fully meshed and have universal hanging with a central sliding bolt and with the option of metal or wooden posts depending on preference.

Wooden Deer Gate

Made to measure

 • Features morticed joints for added strength and optional heavy bottom rail for extra rigidity

 • Available in lengths up to 3600mm long

Fully Meshed Deer Gate

• Suitable for containing or excluding deer
• 1860mm high, 75mm mesh cladding and lockable sliding bolt
• Fully galvanised to BS EN ISO 1461
• It is available in lengths from 0.6m (1’9”) – 4.88m (16’0”) 
• Can be hung as pairs

Deer Post Details