Triple X Fencing Range

• Clipex – not just any steel post

  Clipex® is the multi-award winning innovative galvanised steel post.  

  • Each post has pre-fixed clips designed to take all the horizontal wires of your chosen wire netting.
  • Each wire is held firmly in place with a spring-loaded clip, no fiddly parts to lose or fit after erection. These clips allow lateral flex, but very little vertical wire movement can happen, which is important when livestock start putting pressure on the fence.
  • Each post has a pre-fixed anti-lift plate below ground level to prevent lifting in soft or undulating ground.
  • Hot dip galvanised and independently tested in the UK, exceeding British Standard coating recommendations.
• The Benefits of Clipex

  
  TIME is the most valuable resource we have; Clipex posts are guaranteed to give you more of it. Fencing can be erected in half and in some cases a third of the time of traditional fencing methods.

  STRONGER Clipex posts show a new strength to weight design. They are made with minimum 450-grade high tensile steel, whilst keeping great elongation properties. All our Clipex posts feature a backing plate at ground level, to give the posts strength where it matters most.

  EASIER Clipex is so simple to understand, it does not require specialist tools or experienced tradesmen. Push the wire into the clip and it’s attached, even children understand it, it’s that simple. Clipex’s unique Dacromet clip saves hours stapling and requires less time bent down fixing bottom wires. The unique Clipex post design drives into almost any soil type with ease.

  MAINTENANCE ; All fences require maintenance in their life. Clipex fencing reduces this maintenance drastically. The Clipex fence solution retains the wire but does not restrict it, allowing the wire to take the strain. Should your wire need to be restrained it’s a simple matter of un-clipping, straining and then re-clipping. You can easily replace any damaged sections of fence just as easily as when you installed them. Clipex post can also be used in an emergency quick fix or to bolster up failing fences.

• Post Strength & Specifications

   

  Clipex Eco Post

  The Clipex ® Eco post has been specifically designed as an entry level post to suit the most popular hinge jointed stock fence, plain or barbed line wire applications. Eco posts have been designed to suit hinge jointed 8-80-15 or 8-80-30 products with two rows of barbed or plain wire. The clips may suit some other fence patterns. Manufactured from high tensile steel with a 600g/m ² galvanised coating which ensures a longer life. Note: Please check mesh pattern against posts BEFORE installation, especially important if you are trying to match your own netting.

  Clipex Standard Post

  The Clipex ® Standard post is higher quality than the Eco post, it is manufactured from high tensile steel with a 600g/m2 galvanised coating which provides a longer life with minimal maintenance. Made using a unique cutting edge process which guarantees a high precision product every time. Standard stock fence posts are designed to suit X Fence XHT8-80-15, XHT8-80-22, XHT8-80-30 with two rows of barbed or plain wire above and one base line below. The cattle/railway/horse Standard posts are designed for XHT11-122-7.5, XHT11-122-15 with one top row and one base line of barbed or plain wire.

  Clipex Beefy Post

  The Clipex ® Beefy post is specifically designed to add ground holding and strength to your fence line where it matters. It has a thicker profile than the Standard and Eco posts which gives it an increased surface area in the ground, as well as reducing any twisting. The increased profile also improves the lateral strength. The Beefy posts have a better strength to weight ratio with 60% greater surface area providing 230% more strength than smaller profile posts. This along with the 600g/m ² galvanised zinc coating, anti-lift plate, thicker gauge, high tensile steel and longer length make the Beefy an unbeatably strong and durable post. When should you use a Beefy post? We recommend their use in softer soils, high stock pressure areas, dividing paddocks, and peaks and troughs in undulating ground, as well as slight changes in a fence line of less than 15°. You can also combine with a Beefy bracket and strut for a cost effective angled support. A combination of Standards and a Beefy every third or fourth post will strengthen your fence line. Or you can use all Beefy posts to provide a strong formidable, long-lasting fence that will offer many years of maintenance-free life.

• UK Clipex Range

   

Clipex Standard and beefy post

Clipex Standard and beefy post

Clipex Standard and beefy post

Clipex Standard and beefy post

Clipex Standard and beefy post

Clipex Standard and beefy post

Triple X Strainers have been designed by McVeigh Parker and are proven in the field throughout the UK. Used by contractors, utility companies, farmers and landowners for stock, deer and security fencing. Our British made strainers are a very good alternative to more traditional timber strainers, lasting much longer and saving significant installation and labour time. When teamed up with the Clipex® posts and our premium quality X Fence alu/zinc wire netting you have a fencing system that has a life expectancy of over thirty years.

• Strainer benefits

  
  • Simple and quick installation in under five minutes

  • Cost-effective over the lifetime of fence

  • Guaranteed to exceed a 30 year life

  • Diagonal or Box strainer kits available to suit all terrain and soil

  • Only five components, easy to assemble, no fiddly parts to install or lose

  • Exceptionally strong, fully welded top cap, the thick-walled tubular strainer can be mechanically or hydraulically driven

  Fully welded 6mm thick breast and thrust/directional plates

  • Hot dip galvanised in the UK to BSEN ISO 1461

  • Easy transportation (reduces carbon footprint)

  • Pre-drilled holes to take multiple struts for two way and corner strainers

  • Two lengths to choose from which suit various fence heights

  • Corner plate available for retro-fit to create 90° angle

   

• Strainer Specifications

  
  

Clipex Standard and beefy post

Clipex Standard and beefy post

Clipex Standard and beefy post

Clipex Standard and beefy post

Clipex Standard and beefy post

Clipex Standard and beefy post

Triple X Fencing is McVeigh Parker’s bespoke, long-lasting high-performance fencing solution. This innovative product consists of the Clipex® quick clip steel post coupled with X Fence premium stiffstay wire netting, steel strainers and a choice of either barbed, line or electric wire. Triple X is an agricultural and commercial fencing system like no other, stronger wire, premium coating, easier installation and can offer up to 50% cost savings over its guaranteed 30 year life.

• Clipex Steel Post

  
  Clipex® the multi-award winning innovative galvanised steel post.
  • Each post has pre-fixed clips designed to take all the horizontal wires of your chosen X Fence wire netting.
  • Each wire is held firmly in place with a spring-loaded clip, no fiddly parts to lose or fit after erection.
  • These clips allow lateral flex, but very little vertical wire movement can happen, which is important when livestock start putting pressure on the fence.
  • Each post has a pre-fixed anti-lift plate below ground level to prevent lifting in soft or undulating ground.
  • Hot dip galvanised and independently tested in the UK, exceeding British Standard coating recommendations.

   

• X fence Premium Wire

  
  X Fence premium X knot fabricated wire netting – buying quality wire is key to any good fence.
  
  • The unique properties of X Fence make it stronger and last longer.
  • The high tensile wire properties and one-piece vertical wire reduce the amount of support posts needed, leading to a saving in labour and materials.
  • Only primary metals used in fabrication.
  • 24% stronger knot.
  • Alu/zinc coating lasts 3-4 times longer than heavy galvanised wire.
  • Full traceability from source to field.
  • Many Clipex® compatible mesh patterns are stocked (more patterns available for other uses).
  • X Fence is manufactured to BS EN 10223-5
  • Alu/zinc coating exceeds BS EN 10244-2
  • Dimensions & tolerances conform to BS EN 10218-2

• Triple X Steel Strainer

  
  Triple X Strainers are British made all steel hot dip galvanised, with fully-welded base and thrust plates, fully-welded top cap and pre-drilled holes for ease of strut installation.
  
  • The 3.2mm thick strainer allows them to be driven in hydraulically or mechanically.
  • Diagonal or box strainer versions available, whichever best suits your requirements and budget.
  • Installing a Triple X strainer could not be simpler. Minimal components mean full installation in less than 5 minutes is possible.
  • Galvanised coating to British Standard BS EN ISO 1461

Ideal for deer fencing and deer enclosures, the deer gates we have to offer are the very best choice for reliability and strength. Our deer gates provide you with a secure entry and exit point to your deer fencing without weakening the enclosure. All of our metal deer gates are fully meshed and have universal hanging with a central sliding bolt and with the option of metal or wooden posts depending on preference.

Wooden Deer Gate

Made to measure

 • Features morticed joints for added strength and optional heavy bottom rail for extra rigidity

 • Available in lengths up to 3600mm long

Fully Meshed Deer Gate

• Suitable for containing or excluding deer
• 1860mm high, 75mm mesh cladding and lockable sliding bolt
• Fully galvanised to BS EN ISO 1461
• It is available in lengths from 0.6m (1’9”) – 4.88m (16’0”) 
• Can be hung as pairs

Deer Post Details